BJFe Black Bee OD 3K

BJFe Black Bee OD 3K 

Warm dynamic overdrive, like an old Supro tube amp.

Bjorn's hand wired masterpiece since 2002.

There are plenty of warm, mild overdrive pedals out there, but few that sound like a Honey Bee. Works great with other effects and distorted amps to create a fat, warm overdrive character. Dynamics that can be easily adjusted from clean to overdrive with your pick attack is also a major feature. Black Bee is an overdrive that features an overwhelmingly dynamic response even in a pedal system. With the headroom and frequency response of a small old amp, even a big amp sounds like it was recorded with a small amp. In addition, it can be operated optimally in any position in a complex pedal system. The Drive knob may feel like it has little effect on its own. Set it to 12 o'clock and pluck the strings hard to feel the dynamics. The Nature knob is an adjustment of the frequency range of the distortion. Counter-clockwise increases lows and low-mids, while clockwise provides a softer output. Try setting this control around 12 o'clock. Normally, turning it slightly counterclockwise from there will give you a well-balanced guitar sound. The Vol knob adjusts the volume balance when the effect is on. Start by setting it at 12 o'clock and adjust the tone from there. An example of using HBOD is to connect it to a clean amp and add clarity and distortion to the tone depending on how hard you pick. Flat guitar strings produce a mellow tone, while round strings produce an old-style light distortion. Placing the Black Bee last in the pedal system gives it a softer response and a little boost in the low-mids. It is also ideal for correcting bright amps and tones that have a "ceiling effect" in the high range. When combined with a compressor, connecting Black Bee before the compressor provides distortion that expands the dynamics of the tone without changing the level, and placing Black Bee after the compressor allows the compressor to keep the Black Bee input level constant. . You can use this to adjust the sustain of Black Bee with the compressor. Black Bee's dynamic performance makes it feel like it sustains longer, and works well in combination with other effects . Black Bee has a high input impedance that matches guitar pickups, and the output is set to a maximum value of about 50K, matching guitar amps, many effectors, and tape echoes. Black Bee OD Special runs on a 9V battery or a standard 2.1mm barrel type center negative DC9V adapter. Current consumption is about 3.9mA (2.8mA when the effect is off). When the supply voltage drops to 6V, the tone becomes muffled and the LED becomes dim. In that case, replace the battery or check the connected adapter. Z in at 1kHz: app. 370K Pout 1kHz in 50k: app. 28uW RMS Max load: app. 50KMax output: 0V8 peakMax current consumption: 3mA95 at 10VMax gain at 1KHz: app. 40dB Max input signal: 3V peak Supply Voltage range : 6-12V

free US shipping 

add to cart for international shipping quote

3-day return less any shipping and PP fees. This is a limited quantity hand made product. Each one is slightly different. Freshly painted. Handle with care.